You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

354 lines
9.4 KiB
Plaintext

/*
Copyright 2012 Kasper Skårhøj, SKAARHOJ, kasperskaarhoj@gmail.com
This file is part of the ATEM library for Arduino
The ATEM library is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by the
Free Software Foundation, either version 3 of the License, or (at your
option) any later version.
The ATEM library is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with the ATEM library. If not, see http://www.gnu.org/licenses/.
*/
/*****************
* Example: ATEM Monitor
* Connects to the Atem Switcher and outputs changes to Preview and Program on the Serial monitor (at 9600 baud)
*/
/*****************
* TO MAKE THIS EXAMPLE WORK:
* - You must have an Arduino with Ethernet Shield (or compatible such as "Arduino Ethernet", http://arduino.cc/en/Main/ArduinoBoardEthernet)
* - You must have an Atem Switcher connected to the same network as the Arduino - and you should have it working with the desktop software
* - You must make specific set ups in the below lines where the comment "// SETUP" is found!
*/
#include <SPI.h> // needed for Arduino versions later than 0018
#include <Ethernet.h>
// MAC address and IP address for this *particular* Ethernet Shield!
// MAC address is printed on the shield
// IP address is an available address you choose on your subnet where the switcher is also present:
byte mac[] = {
0x90, 0xA2, 0xDA, 0x00, 0xE8, 0xE9 }; // <= SETUP
IPAddress ip(192, 168, 0, 20); // <= SETUP
// Include ATEM library and make an instance:
#include <ATEM.h>
// Connect to an ATEM switcher on this address and using this local port:
// The port number is chosen randomly among high numbers.
ATEM AtemSwitcher(IPAddress(192, 168, 0, 50), 56417); // <= SETUP (the IP address of the ATEM switcher)
void setup() {
// Start the Ethernet, Serial (debugging) and UDP:
Ethernet.begin(mac,ip);
Serial.begin(9600);
Serial.println("Serial started.");
pinMode(7, INPUT);
// Initialize a connection to the switcher:
AtemSwitcher.serialOutput(true);
AtemSwitcher.connect();
}
boolean buttonState = false;
int c = 0;
void loop() {
// Check for packets, respond to them etc. Keeping the connection alive!
AtemSwitcher.runLoop();
// Detech press of a button on digital input 7:
if (digitalRead(7)) {
if (buttonState == false) {
c++;
switch(c) {
// Program select
case 1:
AtemSwitcher.changeProgramInput(0);
break;
case 2:
AtemSwitcher.changeProgramInput(1);
break;
case 3:
AtemSwitcher.changeProgramInput(2);
break;
case 4:
AtemSwitcher.changeProgramInput(3);
break;
case 5:
AtemSwitcher.changeProgramInput(4);
break;
case 6:
AtemSwitcher.changeProgramInput(5);
break;
case 7:
AtemSwitcher.changeProgramInput(6);
break;
case 8:
AtemSwitcher.changeProgramInput(7);
break;
case 9:
AtemSwitcher.changeProgramInput(8);
break;
case 10:
AtemSwitcher.changeProgramInput(9);
break;
case 11:
AtemSwitcher.changeProgramInput(10);
break;
case 12:
AtemSwitcher.changeProgramInput(11);
break;
case 13:
AtemSwitcher.changeProgramInput(12);
break;
case 14:
AtemSwitcher.changeProgramInput(14);
break;
// Preview select:
case 15:
AtemSwitcher.changePreviewInput(0);
break;
case 16:
AtemSwitcher.changePreviewInput(1);
break;
case 17:
AtemSwitcher.changePreviewInput(2);
break;
case 18:
AtemSwitcher.changePreviewInput(3);
break;
case 19:
AtemSwitcher.changePreviewInput(4);
break;
case 20:
AtemSwitcher.changePreviewInput(5);
break;
case 21:
AtemSwitcher.changePreviewInput(6);
break;
case 22:
AtemSwitcher.changePreviewInput(7);
break;
case 23:
AtemSwitcher.changePreviewInput(8);
break;
case 24:
AtemSwitcher.changePreviewInput(9);
break;
case 25:
AtemSwitcher.changePreviewInput(10);
break;
case 26:
AtemSwitcher.changePreviewInput(11);
break;
case 27:
AtemSwitcher.changePreviewInput(12);
break;
case 28:
AtemSwitcher.changePreviewInput(14);
break;
// Cut / Transitions
case 29:
AtemSwitcher.changeProgramInput(3);
AtemSwitcher.changePreviewInput(4);
break;
case 30:
AtemSwitcher.doCut();
break;
case 31:
AtemSwitcher.doAuto();
break;
case 32:
AtemSwitcher.fadeToBlackActivate();
break;
case 33:
AtemSwitcher.fadeToBlackActivate();
break;
case 34:
AtemSwitcher.changeTransitionPosition(500);
break;
case 35:
AtemSwitcher.changeTransitionPosition(1000);
AtemSwitcher.changeTransitionPositionDone();
break;
case 36:
AtemSwitcher.changeTransitionPreview(true);
break;
case 37:
AtemSwitcher.changeTransitionPreview(false);
break;
case 38:
AtemSwitcher.changeTransitionType(1);
break;
case 39:
AtemSwitcher.changeTransitionType(2);
break;
case 40:
AtemSwitcher.changeTransitionType(3);
break;
case 41:
AtemSwitcher.changeTransitionType(4);
break;
case 42:
AtemSwitcher.changeTransitionType(0); // Back to mix
break;
case 43:
AtemSwitcher.changeUpstreamKeyOn(1, true);
break;
case 44:
AtemSwitcher.changeUpstreamKeyOn(2, true);
break;
case 45:
AtemSwitcher.changeUpstreamKeyOn(3, true);
break;
case 46:
AtemSwitcher.changeUpstreamKeyOn(4, true);
break;
case 47:
AtemSwitcher.changeUpstreamKeyOn(1, false);
break;
case 48:
AtemSwitcher.changeUpstreamKeyOn(2, false);
break;
case 49:
AtemSwitcher.changeUpstreamKeyOn(3, false);
break;
case 50:
AtemSwitcher.changeUpstreamKeyOn(4, false);
break;
case 51:
AtemSwitcher.changeUpstreamKeyNextTransition(1, true);
break;
case 52:
AtemSwitcher.changeUpstreamKeyNextTransition(2, true);
break;
case 53:
AtemSwitcher.changeUpstreamKeyNextTransition(3, true);
break;
case 54:
AtemSwitcher.changeUpstreamKeyNextTransition(4, true);
break;
case 55:
AtemSwitcher.changeUpstreamKeyNextTransition(1, false);
break;
case 56:
AtemSwitcher.changeUpstreamKeyNextTransition(2, false);
break;
case 57:
AtemSwitcher.changeUpstreamKeyNextTransition(3, false);
break;
case 58:
AtemSwitcher.changeUpstreamKeyNextTransition(4, false);
break;
case 59:
AtemSwitcher.changeDownstreamKeyOn(1, true);
break;
case 60:
AtemSwitcher.changeDownstreamKeyOn(2, true);
break;
case 61:
AtemSwitcher.changeDownstreamKeyOn(1, false);
break;
case 62:
AtemSwitcher.changeDownstreamKeyOn(2, false);
break;
case 63:
AtemSwitcher.changeDownstreamKeyTie(1, true);
break;
case 64:
AtemSwitcher.changeDownstreamKeyTie(2, true);
break;
case 65:
AtemSwitcher.changeDownstreamKeyTie(1, false);
break;
case 66:
AtemSwitcher.changeDownstreamKeyTie(2, false);
break;
case 67:
AtemSwitcher.doAutoDownstreamKeyer(1);
break;
case 68:
AtemSwitcher.doAutoDownstreamKeyer(2);
break;
case 69:
AtemSwitcher.doAutoDownstreamKeyer(1);
break;
case 70:
AtemSwitcher.doAutoDownstreamKeyer(2);
break;
case 71:
AtemSwitcher.changeAuxState(1, 1);
break;
case 72:
AtemSwitcher.changeAuxState(1, 16);
break;
case 73:
AtemSwitcher.changeAuxState(2, 1);
break;
case 74:
AtemSwitcher.changeAuxState(2, 16);
break;
case 75:
AtemSwitcher.changeAuxState(3, 1);
break;
case 76:
AtemSwitcher.changeAuxState(3, 16);
break;
case 77:
AtemSwitcher.changeColorValue(1, 2011, 246, 535);
break;
case 78:
AtemSwitcher.changeColorValue(2, 54, 792, 497);
break;
case 79:
AtemSwitcher.changeColorValue(1, 0, 0, 30);
AtemSwitcher.changeColorValue(2, 0, 0, 70);
break;
case 80:
AtemSwitcher.settingsMemorySave();
Serial.println("SAVED SETTINGS");
break;
case 81:
AtemSwitcher.settingsMemoryClear();
Serial.println("CLEARED SETTINGS");
break;
default:
c=0;
break;
}
}
buttonState = true;
}
else {
buttonState = false;
}
}