change pins for pcb and optimize

arduino/Artnet_to_DMX_and_NRF24_644pa/Artnet_to_DMX_and_NRF24_644pa.ino

@@ -8,22 +8,11 @@ const int universeSize = 512;
 ArtnetReceiver artnet;
 uint32_t universe0 = 0;
 uint32_t universe1 = 1;
-byte artnetdata[512];
 
 // ethernet stuff
 const IPAddress ip(10, 255, 255, 255);
 uint8_t mac[] = {0xAA, 0xDD, 0xBB, 0xAA, 0xDD, 0xBB};
 
-//ArtNet universe0 callback
-void callback(byte* data, uint16_t size) {
-  for (size_t i = 0; i < 512; ++i) {
-    artnetdata[i] = data[i];
-    //if (i == 0) analogWrite(30, data[i]);
-    //if (i == 1) analogWrite(8, data[i]);
-    //if (i == 2) analogWrite(9, data[i]);
-  }
-}
-
 //NRF stuff
 #include <SPI.h>
 #include <RF24.h>
@@ -34,13 +23,25 @@ RF24 radio (0, 1);
 const uint16_t address = 0xADB0;
 uint64_t datasend;
 
+//RGB LED
+const int statusLED[] = {23,22, 21}; //RGB
+const int statusLEDlength = 3;
+int statusLEDstat[3];
+
+//define min interval to show error
+unsigned long currentTime = millis();
+unsigned long previousTime = 0;
+const long waitTime = 100;
+const long errorTime = 5000;
+
 //setup
 void setup() {
-  pinMode(12, OUTPUT);
-  pinMode(13, OUTPUT);
-  pinMode(14, OUTPUT);
-
-  pinMode(15, OUTPUT);
+     for (int i=0; i < statusLEDlength; i++){
+    pinMode(statusLED[i], OUTPUT);
+    digitalWrite(statusLED[i], LOW);
+  }
+  pinMode(10, OUTPUT);
+  digitalWrite(10, LOW);
 
   //start DMX
   DMX.begin(universeSize);
@@ -62,26 +63,27 @@ void setup() {
   radio.disableCRC();
   radio.stopListening();
   
-  analogWrite(12, 20);
-  delay(100);
+  setRGB(0,0,255);
+  delay(200);
 }
 
 void loop() {
-  //int timebegin = millis();
-
-  //get ArtNet package
-  while(!artnet.parse());
-  digitalWrite(15, HIGH);
-  /*if (artnet.parse()) { // check if artnet packet has come and execute callback
-    digitalWrite(31, HIGH);
-  }*/
-
-  //uint64_t nrfpackage = artnetdata[0];
+  currentTime = millis();
+  if (artnet.parse()) { // check if artnet packet has come and execute callback
+    previousTime = currentTime;
+    setRGB(0,255,0);
+  }else if(currentTime - previousTime >= errorTime){
+    setRGB(255,0,0);
+  }else if(currentTime - previousTime >= waitTime){
+    setRGB(0,0,255);
+  }
+}
 
+//ArtNet universe0 callback
+void callback(byte* artnetdata, uint16_t size) {
+  digitalWrite(10, HIGH);
   //RGB PWM
-  analogWrite(12, artnetdata[0]);
-  analogWrite(13, artnetdata[1]);
-  analogWrite(14, artnetdata[2]);
+  //setRGB(artnetdata[0], artnetdata[1], artnetdata[2]);
 
   //DMX output
   DMX.beginTransmission();
@@ -99,11 +101,14 @@ void loop() {
     }
     radio.writeFast(&datasend, sizeof(datasend));
   }
+  digitalWrite(10, LOW);
+}
 
-  //int timeend = millis();
-  //int timeneeded = timeend - timebegin;
-
-  //if (timeneeded < 20) delay(20 - timeneeded);
-
-  digitalWrite(15, LOW);
+void setRGB(int r, int g, int b){
+  if (r != statusLEDstat[0]) analogWrite(statusLED[0], r);
+  if (g != statusLEDstat[1]) analogWrite(statusLED[1], g);
+  if (b != statusLEDstat[2]) analogWrite(statusLED[2], b);
+  statusLEDstat[0] = r;
+  statusLEDstat[1] = g;
+  statusLEDstat[2] = b;
 }

arduino/NRF24_to_DMX/NRF24_to_DMX.ino

@@ -38,7 +38,7 @@ void setup() {
   radio.begin();
   radio.openReadingPipe(0, address);
   radio.setPALevel(RF24_PA_MAX);
-  radio.setDataRate(RF24_1MBPS);
+  radio.setDataRate(RF24_2MBPS);
   radio.setAutoAck(false);
   radio.disableCRC();
   radio.startListening();