#include <FastLED.h>  // include FastLED *before* Artnet
#include <Artnet.h>

// WiFi stuff
const char* ssid = "your-ssid";
const char* pwd = "your-password";
const IPAddress ip(192, 168, 1, 201);
const IPAddress gateway(192, 168, 1, 1);
const IPAddress subnet(255, 255, 255, 0);

ArtnetWiFiReceiver artnet;
uint8_t universe = 1;  // 0 - 15

// FastLED
#define NUM_LEDS 1
CRGB leds[NUM_LEDS];
const uint8_t PIN_LED_DATA = 3;

void setup() {
    Serial.begin(115200);
    delay(2000);

    FastLED.addLeds<NEOPIXEL, PIN_LED_DATA>(leds, NUM_LEDS);

    // WiFi stuff
    WiFi.begin(ssid, pwd);
    WiFi.config(ip, gateway, subnet);
    while (WiFi.status() != WL_CONNECTED) {
        Serial.print(".");
        delay(500);
    }
    Serial.print("WiFi connected, IP = ");
    Serial.println(WiFi.localIP());

    artnet.begin();
    // artnet.subscribe_net(0);     // optionally you can change
    // artnet.subscribe_subnet(0);  // optionally you can change

    // if Artnet packet comes to this universe, forward them to fastled directly
    artnet.forward(universe, leds, NUM_LEDS);

    // this can be achieved manually as follows
    // if Artnet packet comes to this universe, this function (lambda) is called
    // artnet.subscribe(universe, [&](uint8_t* data, uint16_t size) {
    //     // set led
    //     // artnet data size per packet is 512 max
    //     // so there is max 170 pixel per packet (per universe)
    //     for (size_t pixel = 0; pixel < NUM_LEDS; ++pixel) {
    //         size_t idx = pixel * 3;
    //         leds[pixel].r = data[idx + 0];
    //         leds[pixel].g = data[idx + 1];
    //         leds[pixel].b = data[idx + 2];
    //     }
    // });
}

void loop() {
    artnet.parse();  // check if artnet packet has come and execute callback
    FastLED.show();
}