You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
adb 324d697986
update filename to 'UIPArtnet.h'
3 years ago
examples update examples 3 years ago
util update ArxTypeTraits to v0.2.1 4 years ago
LICENSE Initial commit 5 years ago
README.md update readme 3 years ago
UIPArtnet.h update filename to 'UIPArtnet.h' 3 years ago
library.json change to UIPEthernet for enc28j60 3 years ago
library.properties update version to v0.2.1 3 years ago

README.md

ArtNet

Art-Net Sender/Receiver for Arduino (Ethernet, WiFi)

NOTE : BREAKING API CHANGES (v0.2.0 or later)

Feature

  • Art-Net with both Ethernet and WiFi
  • Support a lot of boards which can use Ethernet or WiFi
  • Multiple receiver callbacks depending on universe
  • Mutilple destination streaming with sender
  • One-line send to desired destination
  • Flexible net/subnet/universe setting
  • Easy data forwarding to FastLED

Supported Platforms

WiFi

  • ESP32
  • ESP8266
  • Arduino Uno WiFi Rev2
  • Arduino MKR VIDOR 4000
  • Arduino MKR WiFi 1010
  • Arduino MKR WiFi 1000
  • Arduino Nano 33 IoT

Ethernet

  • Almost all platforms without WiFi

Usage

This library has following Art-Net controller options. Please use them depending on the situation.

  • ArtnetReveiver
  • ArtnetSender
  • Artnet (Integrated Sender/Receiver)

ArtnetReceiver

#include <Artnet.h>
ArtnetReceiver artnet;

void callback(const uint8_t* data, const uint16_t size) {
    // you can also use pre-defined callbacks
}

void setup() {
    // setup Ethernet/WiFi...

    artnet.begin(); // waiting for Art-Net in default port
    // artnet.begin(net, subnet); // optionally you can set net and subnet here

    artnet.subscribe(universe1, [](const uint8_t* data, const uint16_t size) {
        // if Artnet packet comes to this universe(0-15), this function is called
    });
    artnet.subscribe(universe2, callback);  // you can also use pre-defined callbacks
}

void loop() {
    artnet.parse(); // check if artnet packet has come and execute callback
}

ArtnetSender

#include <Artnet.h>
ArtnetSender artnet;

void setup() {
    // setup Ethernet/WiFi...

    artnet.begin();
}

void loop() {
    // change send data as you want

    artnet.send("127.0.0.1", universe15bit, data_ptr, size); // one-line send
    // artnet.send("127.0.0.1", net, subnet, univ, data_ptr, size); // or you can set net and subnet

    artnet.streaming_data(data_ptr, size);
    artnet.streaming("127.0.0.1", universe15bit); // automatically send set data in 40fps (15bit universe)
    // artnet.streaming("127.0.0.1", net, subnet, univ); // or you can set net and subnet here
}

Artnet (Integrated Sender/Receiver)

#include <Artnet.h>
Artnet artnet;

void setup()
{
    // setup Ethernet/WiFi...

    artnet.begin(); // send to localhost and listen to default port
    // artnet.begin(net, subnet); // optionally you can set net and subnet here

    artnet.subscribe(universe, [&](const uint8_t* data, const uint16_t size) {
        // if Artnet packet comes to this universe, this function is called
    });

    artnet.subscribe([&](const uint32_t univ, const uint8_t* data, const uint16_t size) {
        // if Artnet packet comes, this function is called to every universe
    });
}

void loop() {
    artnet.parse(); // check if artnet packet has come and execute callback

    // change send data as you want

    artnet.send("127.0.0.1", universe15bit, data_ptr, size); // one-line send
    // artnet.send("127.0.0.1", net, subnet, univ, data_ptr, size); // or you can set net and subnet

    artnet.streaming_data(data_ptr, size);
    artnet.streaming("127.0.0.1", universe15bit); // automatically send set data in 40fps (15bit universe)
    // artnet.streaming("127.0.0.1", net, subnet, univ); // or you can set net and subnet here
}

Artnet Receiver + FastLED

#include <Artnet.h>
ArtnetReceiver artnet;

// FastLED
#define NUM_LEDS 1
CRGB leds[NUM_LEDS];
const uint8_t PIN_LED_DATA = 3;

void setup() {
    // setup Ethernet/WiFi...

    // setup FastLED
    FastLED.addLeds<NEOPIXEL, PIN_LED>(&leds, NUM_LEDS);

    artnet.begin();
    // if Artnet packet comes to this universe, forward them to fastled directly
    artnet.forward(universe, leds, NUM_LEDS);

    // this can be achieved manually as follows
    // artnet.subscribe(universe, [](uint8_t* data, uint16_t size)
    // {
    //     // artnet data size per packet is 512 max
    //     // so there is max 170 pixel per packet (per universe)
    //     for (size_t pixel = 0; pixel < NUM_LEDS; ++pixel)
    //     {
    //         size_t idx = pixel * 3;
    //         leds[pixel].r = data[idx + 0];
    //         leds[pixel].g = data[idx + 1];
    //         leds[pixel].b = data[idx + 2];
    //     }
    // });
}

void loop() {
    artnet.parse(); // check if artnet packet has come and execute callback
    FastLED.show();
}

Other Settings

Subscribing Callbacks with Net, Sub-Net and Universe as you like

  • You can set Net (0-127) and Sub-Net (0-15) like artnet.begin(net, subnet)
  • Universe (0-15) can be set in artnet.subscribe(universe, callback),
  • Callbacks are limited to 4 universes (depending on the spec of Art-Net)
artnet.begin(net, subnet); // net and subnet can be set only once
artnet.subscribe(univ1, callback1); // 4 callbacks can be set
artnet.subscribe(univ2, callback2); // these universes are reported to
artnet.subscribe(univ3, callback3); // Art-Net controller if it polls
artnet.subscribe(univ4, callback4); // Art-Net devices

Sending Art-Net to Net, Sub-Net and Universe as you like

One-line sender

artnet.send(ip, univ15bit, data, size);         // use 15bit universer or
artnet.send(ip, net, subnet, univ, data, size); // net, subnet, and universe

Streaming

artnet.streaming_data(data, size);       // set data first
artnet.streaming(ip, univ15bit);         // stream to 15bit universe or
artnet.streaming(ip, net, subnet, univ); // net, subnet, and universe

ArtPollReply Setting

  • This library supports ArtPoll and ArtPollReply
  • ArtPoll is automatically parsed and sends ArtPollReply
  • net_sw sub_sw sw_in etc. are set automatically based on registerd callbacks
  • You can configure the information of ArtPollReply as follows
    • void shortname(const String& sn)
    • void longname(const String& ln)
    • void nodereport(const String& nr)

APIs

ArtnetSender

// streaming packet
void streaming_data(const uint8_t* const data, const uint16_t size);
void streaming_data(const uint16_t ch, const uint8_t data);
void streaming(const String& ip, const uint32_t universe_);
void streaming(const String& ip, const uint8_t net_, const uint8_t subnet_, const uint8_t universe_);
// one-line sender
void send(const String& ip, const uint32_t universe_, const uint8_t* const data, const uint16_t size);
void send(const String& ip, const uint8_t net_, const uint8_t subnet_, const uint8_t universe_, const uint8_t* const data, const uint16_t size);
// others
void physical(const uint8_t i);
uint8_t sequence() const;

ArtnetReceiver

OpCode parse();
// subscribers
template <typename F> inline auto subscribe(const uint8_t universe, F&& func);
template <typename F> inline auto subscribe(const uint8_t universe, F* func);
template <typename F> inline auto subscribe(F&& func);
template <typename F> inline auto subscribe(F* func);
// for FastLED
inline void forward(const uint8_t universe, CRGB* leds, const uint16_t num);
// unsubscribe
inline void unsubscribe(const uint8_t universe);
inline void unsubscribe();
inline void clear_subscribers();
// ArtPollReply information
void shortname(const String& sn);
void longname(const String& ln);
void nodereport(const String& nr);
// others
inline const IPAddress& ip() const;
uint16_t port() const;
String id() const;
uint16_t opcode() const;
uint16_t opcode(const uint8_t* p) const;
uint16_t version() const;
uint8_t sequence() const;
uint8_t physical() const;
uint8_t net() const;
uint8_t subnet() const;
uint8_t universe() const;
uint16_t universe15bit() const;
uint16_t length() const;
uint16_t size() const;
uint8_t* data();
uint8_t data(const uint16_t i) const;

Note

Some boards without enough memory (e.g. Uno, Nano, etc.) may not be able to use integrated sender/receiver because of the lack of enough memory. Please consider to use more powerful board or to use only sender OR receiver.

Reference

Embedded Libraries

License

MIT